当前位置: 网站首页 > 解决方案

标准集团工程师浅谈UL消防测试与认证(二)

  Fire Door and Fire Window Testing

  防火门和防火窗测试

  Fire Doors

  防火门

  ANSI / UL 10C-Positive Pressure Fire Tests of Door Assemblies

  ANSI / UL 10C - 门在正压力下的燃烧测试

  ANSI / UL 10B - Fire Tests of Door Assemblies

  ANSI / UL 10B - 门的燃烧测试

  ASTM E2074 - Standard Test Method for Fire Tests of Door Assemblies, Including Positive Pressure Testing of Side-Hinged and Pivoted Swinging Door Assemblies

  ASTM E2074 - 门的燃烧测试,包括沿门边的转轴单方向开关的门,和可双方向开关的门在正压力下的测试

  NFPA 252 -- Standard Methods of Fire Tests of Door Assemblies (National Fire Codes, vol. 6)

  NFPA 252 - 门的标准燃烧测试方法(国家火灾规范,第6卷)

  UBC 7-2 (1997) - Fire Tests of Door Assemblies, Parts I , II

  UBC 7-2 (1997) - 门的燃烧测试,第一部分和第二部分

  UL 1784 - Air Leakage Tests for Door Assemblies

  UL 1784 - 门的漏气测试

  Fire Windows

  防火窗

  ASTM E2010 - Standard Test Method for Positive Pressure Fire Tests of Window Assemblies

  ASTM E2010 - 窗的标准正压燃烧测试方法

  UBC 7-4 (1997) - Fire Tests of Window Assemblies

  UBC 7-4 (1997) - 窗的燃烧测试

  UL 9 - Fire Tests of Window Assemblies

  UL 9 - 窗的燃烧测试

  Fire-Resistive Assemblies

  耐火组件

  ISO 834 -- Elements of Building Construction

  ISO 834 - 基本建筑部件

  UL 263 - Fire Tests of Building Construction and Materials (ASTM E119, NFPA 251, UBC 7-1)

  UL 263 - 建筑和材料的燃烧测试 (ASTM E119, NFPA 251, UBC 7-1)

  UL 1709 - Rapid Rise Fire Tests of Protection Materials for Structural Steel

  UL 1709 -建筑用钢的保护材料的快速升温燃烧测试

  Joint Systems

  接合系统

  ASTM E1966 -- Standard Test Method for Fire-Resistive Joint Systems

  ASTM E1966 - 耐火建筑接合系统的标准测试方法

  UL 2079 - Tests for Fire Resistance of Building Joint Systems

  UL 2079 - 建筑接合系统的耐火性测试

  Safes and Record Protection Equipment

  保险箱和档案保护设备

  UL 72 - Tests for Fire Resistance of Record Protection Equipment

  UL 72 - 档案保护设备的耐火性测试

  Through-Penetration Firestop Systems

  建筑穿孔上的防火填充物

  UL 1479 - Fire Tests of Through-Penetration Firestops (ASTM E814)

  UL 1479 - 建筑穿孔上的防火填充物的燃烧测试 (ASTM E814)

  Wrapping Systems

  外包裹系统

  ASTM E1725 -- Standard Test Methods for Fire Tests of Fire-Resistive Barriers Systems for Electrical System Components

  ASTM E1725 - 电气系统零件的耐火保护系统的燃烧测试

  ICBO ES AC 101 - Acceptance Criteria for Grease Duct Enclosure Assemblies

  ICBO ES AC 101 - 油渍管道系统的可接受标准

  ISO 6944 - Fire Resistance Tests - Ventilation Ducts

  ISO 6944 - 耐火性测试—通风管

  SBCCI - Evaluation Guide on Fire Resistive Construction (Flexible Duct Wrap Enclosure Systems)

  SBCCI - 耐火构造的评估指南 (软性管道的包覆系统)

  UL 2221 - Tests of Fire Resistive Grease Duct Enclosure Systems

  UL 2221 - 油渍管道系统的耐火性测试

  Suppression

  灭火

  Automatic Sprinklers

  自动水喷淋装置

  ISO 6182 -- Fire Protection - Automatic Sprinkler Systems - Part 1 through Part 5

  ISO 6182 - 防火—自动水喷淋系统—第一部分至第五部分

  UL 199 - Automatic Sprinklers for Fire-Protection Service

  UL 199 - 防火用自动水喷淋装置

  UL 1767 - Early-Suppression Fast-Response Sprinklers

  UL 1767 - 早期扑灭快速反应水喷淋装置

  Extinguishing System Units

  灭火装置

  Clean Agent

  清洁制剂

  UL 2127 - Inert Gas Clean Agent Extinguishing System Units

  UL 2127 - 惰性气体清洁制剂灭火系统

  UL 2166 - Halocarbon Clean Agent Extinguishing System Units

  UL 2166 - 卤烃清洁制剂灭火系统

  NFPA 2001 - Standard for Clean Agent Fire Extinguishing Systems

  NFPA 2001—清洁制剂灭火系统

  Carbon Dioxide

  二氧化碳

  UL 2127 - Inert Gas Clean Agent Extinguishing System Units

  UL 2127 - 惰性气体清洁制剂灭火系统

  UL 2166 - Halocarbon Clean Agent Extinguishing System Units

  UL 2166 - 卤烃清洁制剂灭火系统

  NFPA 12 - Standard on Carbon Dioxide Extinguishing Systems

  NFPA 12 - 二氧化碳灭火系统

  Dry Chemical

  干燥化学制品

  UL 1254 - Pre-Engineered Dry Chemical Extinguishing System Units

  UL 1254 - 预制的干燥化学灭火系统

  NFPA 12 - Standard for Dry Chemical Extinguishing Systems

  NFPA 12 - 干燥化学灭火系统

  Low-Expansion Foam and Equipment

  低膨胀泡沫和设备

  UL 162 - Foam Equipment and Liquid Concentrates

  UL 162 - 发泡设备和浓缩液

  NFPA 11 - Standard for Low-, Medium-, and High-Expansion Foam

  NFPA 11 - 低, 中, 高膨胀泡沫的标准

  NFPA 16 - Standard for the Installation of Foam-Water Sprinkler and Foam-Water Spray Systems

  NFPA 16 - 泡沫-水喷淋系统和泡沫-水喷雾系统的安装

  NFPA 20 - Standard for the Installation of Stationary Pumps for Fire Protection

  NFPA 20 - 消防用固定泵的安装

  NFPA 409 - Standard on Aircraft Hangars

  NFPA 409 - 飞机库标准

  High-Expansion Foam and Equipment

  高膨胀泡沫和设备

  UL 139 - Outline for High-Expansion Foam-Extinguishing System Equipment and Concentrates

  UL 139 - 高膨胀泡沫灭火系统的设备和浓缩液的标准概要

  UL 162 - Foam Equipment and Liquid Concentrates

  UL 162 - 发泡设备和浓缩液

  NFPA 11A - Standard for Medium- and High-Expansion Foam Systems

  NFPA 11A - 中,高膨胀泡沫系统

  Wet Chemical Solution

  化学溶液

  UL 300 -- Fire Testing of Fire Extinguishing Systems for Protection of Commercial Cooking Equipment

  UL 300 - 保护商业用烹饪设备的灭火系统

  UL 1254 - Pre-Engineered Dry Chemical Extinguishing System Units

  UL 1254 - 预制干燥化学灭火系统

  NFPA 17A -- Standard for Wet Chemical Extinguishing Systems

  NFPA 17A - 湿化学灭火系统

  Fire Extinguishers

  灭火器

  UL 8 - Foam Fire Extinguishers

  UL 8 - 泡沫灭火器

  UL 154 - Carbon-Dioxide Fire Extinguishers

  UL 154 - 二氧化碳灭火器

  UL 299 - Dry Chemical Fire Extinguishers

  UL 299 - 干燥化学制剂灭火器

  UL 626 - 2-1/2 Gallon Stored-Pressure, Water-Type Fire Extinguishers

  UL 626 - 2.5加仑压力水质灭火器

  UL 2129 - Halocarbon Clean Agent Fire Extinguishers

  UL 2129 - 卤烃清洁制剂灭火器

  Fire Main Equipment

  消防管道设备

  UL 246 - Hydrants for Fire-Protection Service

  UL 246 - 消防龙头

  UL 789 - Indicator Posts for Fire-Protection Service

  UL 789 - 消防用指示贴

  UL 1285 - Pipe and Couplings, Polyvinyl Chloride (PVC), for Underground Fire Service

  UL 1285 - 用于地下的聚氯乙烯 (PVC) 消防管道和接头

  UL 1821 - Thermoplastic Sprinkler Pipe and Fittings for Fire Protection Services

  UL 1821 - 消防用的热塑性塑料水喷淋管道和配件

  Fire Pumps & Engines

  消防泵和发动机

  UL 448 - Pumps for Fire-Protection Service

  UL 448 - 用于消防设备的泵

  UL 1247 -Diesel Engines for Driving Centrifugal Fire Pumps

  UL 1247 - 用于离心式消防泵的柴油发动机

  Residential Sprinklers

  住宅用水喷淋

  UL 1626 - Residential Sprinklers for Fire-Protection Service

  UL 1626 - 消防用的住宅水喷淋装置

  Sprinkler Piping Systems

  水喷淋管道系统

  UL 203 - Pipe Hanger Equipment for Fire-Protection Service

  UL 203 - 消防用水管挂架设备

  UL 213 - Rubber Gasketed Fittings

  UL 213 - 带橡胶垫圈的配件

  UL 1474 - Adjustable Drop Nipples for Sprinkler Systems

  UL 1474 - 用于安装水喷淋头的可调节管道接头

  UL 1821 - Thermoplastic Sprinkler Pipe and Fittings for Fire-Protection Service

  UL 1821 - 消防用的热塑性塑料水喷淋管道和配件

  Valves for Fire Protection Systems

  UL 193 - Alarm Valves for Fire-Protection Services

  UL 193 - 消防用报警阀

  UL 258 - Outline of Investigation for Shutoff Valves for Trim and Drain Purposes

  UL 258 - 排水用截止阀的评估概要

  UL 260 - Dry Pipe and Deluge Valves for Fire-Protection Service

  UL 260 - 消防用干管和雨林阀

  UL 262 - Gate Valves for Fire-Protection Service

  UL 262 - 消防用闸式阀

  UL 312 - Check Valves for Fire-Protection Service

  UL 312 - 消防用止回阀

  UL 1091 -Butterfly Valves for Fire-Protection Service

  UL 1091 -消防用蝶形阀

  Water Mist Nozzles-水雾喷头

  UL 2167 - Water Mist Nozzles for Fire-Protection Service

  UL 2167 - 消防用水雾喷头

联系我们
  • 标准集团(香港)有限公司
  • 电话:021-67801892
  • 传真:021-67801892-810
  • 邮箱:info@standard-groups.com
  • 邮编:201199
  • 地址:上海市松江区伴亭路258号

标准集团(香港)有限公司专业提供水平燃烧性测试仪价格报价,产品原装进口、品质可靠。 网站地图

热门关键词:水平燃烧性测试仪,垂直燃烧测试仪,水平垂直燃烧测试仪,汽车内饰燃烧测试仪,45度燃烧性测试仪,燃烧测试仪,织物燃烧性测试仪,织物垂直燃烧测试仪,口罩阻燃测试仪

工信部备案:沪ICP备09087680 号-9

点击留言

QQ:

在线客服

QQ: